Forwarding Documents with Forwarding Errors
To use ths functon <STORE TO MEMORY> n <FORWARD ERR.SET> n <SYSTEM SETTINGS> must be set to
<ON>.
1
Press [System Monitor] repeatedly to select <FORWARD ERR. STATUS>, then
press [OK].
2
Press [
] or [
3
Press [
] or [
4
Specify the destination, then press [OK].
The machne starts to send the selected document.
–
You can specfy only one destnaton regstered n a one-touch key or coded dal code.
–
The document s erased from memory f transferrng s successful.
5-20
] to select the desired document, then press [OK].
] to select <FORWARD>, then press [OK].