Canon Laser Class 810 Basic Operation Manual page 143

4
Enter the desired three-digit code (LASER CLASS 810: 000 to 119, LASER CLASS
830i: 000 to 419) with the numeric keys.
Ex.
= 0 1 2 3 X X X X X X
[ * 0 0 1 ] C A N O N
If you entered a wrong code, press [Clear], then try agan from step 3.
If you want to adjust the mage qualty and densty, see "Scan Settngs, " on p. 4-5.
5
Press [Start].
When <TIME OUT> s set to <ON> n <TX SETTINGS> n <FAX SETTINGS> n <TX/RX SETTINGS>, and f
you have specfed the destnaton by any other method than usng numerc keys, the machne starts
scannng automatcally wthout pressng [Start], after the preset tme for ths settng s elapsed.
4-47