Canon Laser Class 810 Basic Operation Manual page 212

7
Press [ ] or [
press [OK].
If you select <REDUCE DIRECTION>, skp to step 11.
8
Press [ ] or [
If you select <AUTO>, adjust the mage reducton automatcally. Skp to step 10.
9
Press [ ] or [
then press [OK].
10
Press [ ] or [
11
Press [ ] or [
press [OK].
<VERTICAL ONLY>: Reduces the document vertcally only.
<HORIZ & VERTICAL>: Reduces the document both horzontally and vertcally.
12
Press [Stop] to return to the standby mode.
5-28
] to select <RX REDUCTION> or <REDUCE DIRECTION>, then
] to select <AUTO> or <FIXED REDUCTION>, then press [OK].
] to select a preset reduction ratio (90%, 95%, 97 %, or 75%),
] to select <REDUCE DIRECTION>, then press [OK].
] to select <VERTICAL ONLY> or <HORIZ & VERTICAL>, then