Canon Laser Class 810 Basic Operation Manual page 374

SYSTEM SETTINGS
ON
2. SMB SERVER SET
OFF
ON
1. SERVER
2. WORKGROUP
3. COMMENT
4. LM ANNOUNCE
3. SNMP SETTINGS
1. USE SNMP
2. COMMUNITY NAME 1
3. COMMUNITY NAME 2
4. SNMP WRITABLE 1
5. SNMP WRITABLE 2
6. PRINTER MGMT INFO
12-44
Specfes a MAC address flter to access. MAC address must be
entered for each settng.
– 1. PERMIT RX ADD1
– 2. PERMIT RX ADD2
– 3. PERMIT RX ADD3
– 4. PERMIT RX ADD4
– 5. PERMIT RX ADD5
Sets the SMB settngs to use the machne on a NetBIOS
**
network.
SMB clent s not used.
SMB clent s used.
Enters the NetBIOS name of the machne.
Enters the name of the workgroup the machne belongs to.
Enters a comment about the prnter.
Sets f the machne notfes the LAN Manager of ts exstence.
– OFF
– ON
Sets detaled nformaton about SNMP.
Sets whether to actvate SNMP.
– ON
– OFF
Sets SNMP communty name 1 (default: publc).
Sets SNMP communty name 2.
Enables computers on the network to access the machne and
modfy ts settngs.
– ON
– OFF
Enables computers on the network to access the machne and
modfy ts settngs.
– OFF
– ON
Sets whether to automatcally enable the SNMP port
montorng functon, when a port s set to [Standard TCP/IP
Port] n Wndows Vsta. The SNMP port montorng functon
can obtan prnt management nformaton such as prnter
applcatons and prnter ports.
– OFF
– ON