Cleaning The Machine; Exter - Canon Laser Class 810 Basic Operation Manual

Cleaning the Machine

Note the following before cleaning your
machine:
– Make sure no document is stored in
memory, then turn off the main power
switch and disconnect the power cord.
– Use a soft cloth to avoid scratching the
components.
– Do not use tissue paper, paper towels,
or similar materials for cleaning;
they can stick to the components or
generate static charges.
Never use volatle lquds such as thnners, benzene,
acetone, or any other chemcal cleaner to clean
the machne. These can damage the machne
components.
When you turn off the man power swtch, the
documents stored n memory wll be erased. To check
the jobs stored n memory, see the followng:
– "Checkng and Deletng Copy Jobs," on p. 3-20
– "Checkng and Deletng Sendng Documents Stored
n Memory," on p. 4-87
– "Checkng and Deletng Recevng Documents
Stored n Memory," on p. 5-31
– "Checkng and Deletng Prnt Jobs," on p. 6-4
10-2
Exterior
1
Turn off the main power switch
and disconnect the power cord.
2
Wipe the machine's exterior
with a clean, soft, lint-free cloth
dampened with water or diluted
dishwashing detergent solution.
3
Wait for the machine to dry, then
reconnect the power cord and turn
on the main power switch.