Editing Camera Wired Network Settings - Lorex LNC201 User Manual

sliders to set the Start time (when night mode begins each day) and End time (when
night mode ends each day), then tap OK.
• Manual: Manually select day mode or night mode. If using this option, select Day for
day mode or Night for night mode.
4. Tap Update to save your changes.

5.4.9 EDITING CAMERA WIRED NETWORK SETTINGS

Configure the camera IP address when connected using Ethernet. Select DHCP or Fixed
IP.
To edit camera wired network settings:
1. In Camera List, tap
Select Schedule to schedule
day/night mode switch
Tap to configure day/
night mode schedule
Select Manual
Select Day or Night mode
next to the camera you would like to edit.
iPhone® App
93