Configuring Led Control And Motion Detection Sensitivity - Lorex LNC116 Instruction Manual

iPhone App
4. Configure the following:
• Video color: Select Colored to view the camera in color or select Black & white. Tap
Video to return to Video settings.
• Brightness: Manually adjust the brightness of the image between 10 (highest) and
1 (lowest). Tap Video to return to Video settings.
• Sharpness: Manually adjust the sharpness of the image between 10 (highest) and 1
(lowest). Tap Video to return to Video settings.
• Low Light Sensitivity: Set the camera's sensitivity in low light environments between
Very High (highest), High , and Normal (lowest). Tap Video to return to Video settings.
• Place: Select Outdoor for well lit environments. Select Indoor if you notice strip lines
in the image or if the picture is too dark on the Outdoor video setting. Select Indoor
+ Sunlight if the picture is too bright on the Indoor Video setting. If you select an
indoor setting, select 60Hz or 50Hz to adjust the camera for the frequency of your
indoor lighting. Tap Video to return to Video settings.
• Preference: Select whether you would like the camera to reduce the image quality
or the frame rate when bandwidth increases or decreases. Select Video Motion to
have the camera maintain the frame rate and reduce image quality when bandwidth
is insufficient. Select Image Quality to have the camera maintain image quality and
reduce frame rate when bandwidth is insufficient. Select Better Quality to have the
camera maintain frame rate and increase quality when bandwidth is sufficient. Select
Best Quality to have the camera maintain the frame rate and increase quality to the
maximum speed of the connection. Tap Video to return to Video settings.
• Time Display on Video: Select ON to enable time stamps on video or OFF to disable
time stamps.
• Video flip: Select ON to flip the camera image vertically and horizontally or select
OFF for the normal orientation. This is useful if the camera has been mounted to a
wall or ceiling upside down.
5. Tap Video Settings when finished making changes, then tap Update to save your
settings.
6.4.6 CONFIGURING LED CONTROL AND MOTION DETECTION
SENSITIVITY
Configure the behavior of the camera status LED's. This is useful if you want the camera
to be harder to spot at night. You can also configure the sensitivity for video motion
detection.
92