Configuring Led Control And Motion Detection Sensitivity - Lorex LNC216 SERIES Instruction Manual

iPhone® App
is insufficient. Select Image Quality to have the camera maintain image quality and
reduce frame rate when bandwidth is insufficient. Select Better Quality to have the
camera maintain frame rate and increase quality when bandwidth is sufficient. Select
Best Quality to have the camera maintain the frame rate and increase quality to the
maximum speed of the connection. Tap Video to return to Video settings.
• Time Display on Video: Select ON to enable time stamps on video or OFF to disable
time stamps.
• Video flip: Select ON to flip the camera image vertically and horizontally or select
OFF for the normal orientation. This is useful if the camera has been mounted to a
wall or ceiling upside down.
5. Tap Video Settings when finished making changes, then tap Update to save your
settings.
6.4.7 CONFIGURING LED CONTROL AND MOTION DETECTION
SENSITIVITY
Configure the behavior of the camera status LED's. This is useful if you want the camera
to be harder to spot at night. You can also configure the sensitivity for video motion
detection.
To configure LED's and motion detection sensitivity:
1. In Camera List, tap
2. Tap Video Settings. Then tap Control.
3. Under Status LED, select one of the following:
• Normal: LED's will function as normal. For details on LED functions, see "Camera
Overview" on page 1.
• Always turn off: LED's are turned off at all times.
• Turn off after network connected: LED's turn on when the camera is powered on
and turn off once a network connection is made.
106
next to the camera.
Select LED behavior
Select video motion detection sensitivity