Idle Motion; Privacy Mask - Lorex LZV1722 Instruction Manual

1 Using the On-Screen Display (OSD) Menu
To add a pattern:
1. Launch the OSD menu. Use the on-screen arrow keys to navigate to FUNCTION SET-
TING and click Enter.
2. Select PATTERN and click Enter.
3. Under PATTERN NO, click the left / right arrow keys to select a number for the pattern.
4. Select PROGRAM START and click Enter.
5. Exit the OSD menu and use the DVR controls to move the camera in the pattern you
want to save. Once you have completed the pattern, launch the OSD menu again. Re-
peat steps 1 & 2 to access the PATTERN menu again.
6. Select PROGRAM STOP and click Enter. The pattern has now been saved.
Note
If you wish to test the pattern, select CALL and click Enter. The camera will begin the pattern. To stop
the test, select STOP and click Enter.

1.4.6 Idle Motion

Choose an action for the camera to perform when left idle for a period of time.
To setup idle motion:
1. Launch the OSD menu. Use the on-screen arrow keys to navigate to FUNCTION SET-
TING and click Enter.
2. Select IDLE MOTION and click Enter.
3. Under IDLE FUNCTION, select ON to use idle motion, or OFF to perform no action
during idle periods.
4. Under IDLE TIME, use the left / right arrows to set how long before the camera begins
performing the idle motion.
5. Under IDLE ACTION, select the type of idle action for the camera to perform. Choose
from PRESET, SCAN, TOUR, PATTERN, or NONE.
6. Under PARAMETER, select the number for the chosen idle action. For example, set-
ting an IDLE TIME of 5MIN, an IDLE ACTION of TOUR, and a PARAMETER of 1 will
make the camera perform TOUR 1 after the camera is left idle for 5 minutes.

1.4.7 Privacy Mask

Applying a privacy mask places a black box over a specific area of the camera. You can
configure up to 24 privacy masks.
CAUTION
Privacy mask areas are blocked in recordings.
#LX400027; r. 1.0/16996/16996; en-US
26