Fujitsu N7100 Operator's Manual page 347

6. Close the sheet guide.
Make sure that both ends of the sheet guide are locked firmly.
7. Close the LCD cover.
 You should hear a click.
CAUTION
8. Connect the power cable, and turn on the scanner.
For details, refer to
9. Reset the Roller Set usage counter.
The usage counter is reset by an administrator.
For detailes, refer to
Be careful that the LCD cover does not shut on your fingers.
"2.1 Turning the Power On/Off" (page
"Resetting the Usage Counter" (page
347
6.5 Replacing Parts
50).
155).