Fujitsu N7100 Operator's Manual page 376

■ Check item
Is the brake roller or the pick roller dirty?
■ Action
Clean the brake roller and the pick roller.
For more details, refer to
■ Check item
Is the brake roller or the pick roller worn out?
■ Action
Replace the brake roller or the pick roller.
For more details, refer to
■ Check item
Is the scanner used at 2,000 m or higher altitudes?
■ Action
Enable the [High Altitude Mode] in the [Multifeed Settings] window in the administrator settings.
For more details, refer to
Document is not fed into the scanner (pick error occurs frequently or
document feed stops halfway).
■ Check item
Do the documents satisfy the conditions given in
(P.388)?
■ Action
Use documents which satisfy the conditions described in
■ Check item
Is the brake roller or the pick roller dirty?
■ Action
Clean the brake roller and the pick roller.
For more details, refer to
■ Check item
Is the brake roller or the pick roller worn out?
■ Action
Replace the brake roller or the pick roller.
For more details, refer to
■ Check item
Is there any foreign matter in the document feed path?
■ Action
Clean the document feed path.
"6.3 Cleaning Inside the Scanner"
"6.5 Replacing Parts" (P.339).
"4.5.1 Setting the Multifeed Detection Method" (page
"6.3 Cleaning Inside the Scanner"
"6.5 Replacing Parts" (P.339).
376
7.3 Other Troubleshooting
(P.332).
87).
"A.2 Paper Quality"
"A.2 Paper Quality" (P.388).
(P.332).