Cleaning A Carrier Sheet - Fujitsu N7100 Operator's Manual

6.4

Cleaning a Carrier Sheet

Use a soft dry cloth, a cloth slightly moistened with Cleaner F1 or a mild detergent, or the
Cleaning Wipe to clean a Carrier Sheet.
Lightly wipe off the dirt and dust from the surface and interior of a Carrier Sheet.
As the Carrier Sheet is repeatedly used, dirt and dust may collect on the surface of or
inside the Carrier Sheet.
To prevent scanning malfunction, the carrier sheet should be regularly cleaned.
ATTENTION
 Be careful not to leave any crease on the Carrier Sheet.
 Do not use paint thinner or other organic solvents. The shape or color may be changed.
 Do not rub too hard, as the Carrier Sheet may become scratched or deformed.
 After cleaning the interior of the Carrier Sheet, wait until it has completely dried before
closing it.
 As a guideline, it is recommended to replace the Carrier Sheet every 500 scans.
For details about purchasing a Carrier Sheet, refer to
(page 348).

6.4 Cleaning a Carrier Sheet

"6.5.4 Purchasing a Carrier Sheet"
338