Fujitsu N7100 Operator's Manual page 350

4. Press the [Scan] button.
 The scan test starts.
 When the scan test has completed, the [Scan Viewer] window appears.
If the scanner fails to scan correctly, an error message is displayed. Deal with
errors as required.
5. Check the scanned data.
For more details about [Scan Viewer], refer to the following:
"5.11 Editing the Scanned Data in the Scan Viewer" (page 308)
6. Press the [OK] button.
 The [Maintenance] window is shown again.
350
6.6 Performing a Scan Test