Fujitsu N7100 Operator's Manual page 320

2. Press the [Scan] button on the [Message Screen].
 Scanning starts.
When the scanning has completed, the [Scan Viewer] window appears.
HINT
 When [Off] is set, the [Scan Viewer] window is not shown.
 When a file name can be changed, the [File Name] window is shown before a scan. For
details about the operation, refer to
Attachment)" (page
 When the scan count is enabled to be changed in the job sequence settings, the [Scan
Count] window is shown before a scan. For details about the operation, refer to
Checking the Number of Sheets to Be Scanned" (page
3. Check and edit the scanned data.
Scanned data can be checked on the [Scan Viewer] window. The scanned data can
be edited on the scan viewer details window which is displayed after a scanned
image is selected.
For more details, refer to
308).
4. Press the [OK] button on the [Scan Viewer] window.
 The data is processed according to the specified job.
While the job is being processed, the process is shown in real time on the [Job
Progress] window.
HINT
 To view the job report, press the [Job Report] button on the [Job Progress] window. This
will show the job report.
 To view detailed information on the job report, select a function name on the [Job
Report] window or press
 If the job sequence is processed successfully, the touch panel screen returns to
the [Job Menu].
If an error occurs during the job process, the [OK] button appears on the [Job
Progress] or [Job Report] window. Pressing the [OK] button returns to the [Job
Menu].
"5.14.2 Changing a File Name (for Save/e-Mail
323).
"5.11 Editing the Scanned Data in the Scan Viewer" (page
. This will show the job report details.
320
5.14 Processing a Job
324).
"5.14.3