Replacing Parts; Part Numbers And Replacement Cycle - Fujitsu N7100 Operator's Manual

6.5

Replacing Parts

6.5.1 Part Numbers and Replacement Cycle

The following table specifies the replacement part numbers and the standard replacement
cycles.
Roller Set
 Brake Roller
 Pick Roller
These replacement cycles are rough guidelines for when using 80 g/m
woodfree or wood containing paper. They may vary according to the type of documents
scanned, scanner usage, and cleaning frequency.
ATTENTION
 When the consumable alert status is orange or red, contact your scanner administrator to
replace the necessary part.
 Use only the PFU parts specified. Do not use consumable parts made by other
manufacturers.
For more details about how to check the consumable alert status, refer to
the Consumable Alert Status" (page
To obtain these parts, contact your FUJITSU dealer or an authorized FUJITSU scanner
service provider. For more details, refer to the following web page:
http://www.fujitsu.com/global/about/resources/shop/computing/peripheral/scanners/
Part Name Part No.
PA03706-
0001
340).
339

6.5 Replacing Parts

Replacement Cycle
After every 200,000 sheets
scanned or once a year
2
(20 lb) A4/Letter
"6.5.2 Checking