Fujitsu N7100 Operator's Manual page 298

1. Select [Edge Correction] under [Page] on the scan settings window.
 The [Edge Correction] window appears.
2. Specify whether or not to use the edge filler function, and when it is
used, specify the color and area to be filled in.
3. Press the [OK] button.
 The information entered is set.
ATTENTION
When image rotation is enabled, the edge is filled with a color after the rotation.
This section uses an example where [Auto] or [90°(CCW)] is selected on the [Rotation]
window.
Original document
Feed direction
Rotation
ABC
Rotated 90 degrees CCW
298
5.9 Setting the Scan Options
Filling Edge
ABC