Fujitsu N7100 Operator's Manual page 370

In Internet Explorer, the security level for the target zone is set to [High]
on the [Security] tab in the [Tools] menu - [Internet Options].
For [Custom Level], [Prompt] or [Disable] is set for [Active scripting]
under [Scripting] in the [Settings] area.
■ Action
When connecting using the scanner name, the connection will be an intranet connection. If the
URL includes an IP address, the scanner will be connected using the Internet Zone.
Try the following settings for the corresponding zone.
1. In Internet Explorer, select the [Tools] menu  [Internet Options].
2. Enable active scripting in either of the following ways.
 On the [Security] tab, click the [Default level] button to set [Security level for this zone] to
[Medium].
 On the [Security] tab, click the [Custom level] button to set to [Enable] for [Active scripting]
under [Scripting] in the [Settings] area.
3. If connecting via the Internet zone, on the [Privacy] tab, set the level to below [Medium High].
4. Delete temporary internet files.
For details about setting values, refer to Help for Internet Explorer.
The scanner is in standby mode.
■ Action
Press the power button to start the scanner.
A proxy server is being used.
■ Action
Set the proxy server to not be used.
1. In Internet Explorer, select the [Tools] menu  [Internet Options].
2. Press the [LAN settings] button on the [Connections] tab.
3. Clear the [Use a proxy server for your LAN (These settings will not apply to dial-up or VPN
connection).] check box.
There is an error with the connection protocol setting.
■ Action
Check if SSL is enabled on the [Admin Connection] window.
For details, refer to
There is an error with the port number setting.
■ Action
Check the specified port number on the [Admin Connection] window.
For details, refer to
"4.9.1 Setting the Admin Connection" (page
"4.9.1 Setting the Admin Connection" (page
370
7.2 Network Connection Troubleshooting
109).
109).