Fujitsu N7100 Operator's Manual page 312

3. Load the documents with the images that you want to adjust into the
ADF paper chute, and press the [OK] button.
 Scanning starts.
 After scanning is complete, the [Assisted Scan] window appears.
4. Select a sample that is closest to the best image from the sample
images.
 A selected sample image is displayed as [Current].
The sample images are updated based on the [Current] image.
The adjustment level of the sample images can be changed by adjusting [Step
size].
When the blank page skip function is enabled, the label appears on image and
you can check whether it is blank page or not.
The item which can be adjusted varies depending on the image mode. When the
image mode is [Black & White], the [Foreground] tab and the [Background]
appear.
 Repeat until you get the best image.
5. Press the [OK] button when the most suitable image appears.
 The image is replaced, and the window returns to the scan viewer details
window.
5.11 Editing the Scanned Data in the Scan Viewer
312