Detecting Multifeeds - Fujitsu N7100 Operator's Manual

5.9.19 Detecting Multifeeds

The scanner can be set to detect multifeeds and stop the scan with an error message.
Multifeeds are to be detected by layer and length.
The following explains how to set whether or not multifeeds are to be detected and set up
multifeed detection method.
For multifeed requirements, refer to
1. Select [Multifeed Detection] under [Paper Feeding] on the scan settings
window.
 The [Multifeed Detection] window appears.
2. Specify whether to delete multifeeds, and select which detection method
is to be used.
3. Press the [OK] button.
 The information entered is set.
"A.5 Multifeed Detection Conditions" (page
300
5.9 Setting the Scan Options
392).