Checking For Updates At Scanner Startup; Requesting E-Mail Notification When A New Update Is Available - Fujitsu N7100 Operator's Manual

■ Checking for Updates at Scanner Startup

You can set the function for automatically checking for updates each time the scanner is
started.
1. Select [System Update] under [Maintenance].
 The [System Update] window appears.
2. Select the [Check for updates at scanner startup.] check box.
HINT
Checking for new updates is also performed when the scanner enters standby mode.
■ Requesting e-Mail Notification When a New Update is
Available
The administrator can set to receive an e-mail notification if a new update is released.
1. Select [System Update] under [Maintenance].
 The [System Update] window appears.
2. Select the [Check for updates at scanner startup.] check box.
3. Select the [Request e-mail notification when a new update is released]
check box.
 When a new update is released, an e-mail entitled "Event notification from
Network Scanner Scanner_Name" is sent to the e-mail address that is set in the
[Alert Notification] window. For details about the e-mail address settings for alert
notification, refer to
178).
"4.17.6 Setting the Destination for Alert Notifications" (page
172
4.17 Maintaining the System