Fujitsu N7100 Operator's Manual page 92

2. For [Authentication Mode], select an authentication mode.
HINT
When an alias is used for the administrator account, if a local account or LDAP user is
set with the same alias account name, login will be processed for the administrator
account. In this case, even if a password error occurs, login as a local account or LDAP
user cannot be performed.
The priority of the authentication destinations for the login is as follows:
1. Alias account
2. Order specified by [Authentication Mode]
3. For [Auto Login], select whether or not to enable automatic login.
ATTENTION
 The automatic login setting is applied immediately after an administrator logout. To
change the settings while the [Auto Login] is [ON], perform administrator login from the
[Maintenance] window or perform the login via the Admin Tool.
 If Central Admin is enabled in a scanner for which automatic login is enabled, when the
scanner is started or resumed from standby mode, preference is given to checking for
available scanner settings, add-in installs and system settings in the Central Admin
Server, over automatic login.
When scanner settings, Add-ins or system settings are available, they are installed in
the scanner. If the number of scanners connecting to the Central Admin Server exceeds
the maximum acceptable number, the installation is skipped, and automatic login is
performed.
Updates will be applied to the scanner when a logout is performed from the
[Administrator Login] window, when the scanner starts next time, or when the scanner
resumes from standby mode.
4. When [Auto Login] is set to [Yes], enter a [User Name] and [Password].
The scanner follows the Active Directory user name format when authenticating the
user login.
 For users registered in the LDAP server
 When the [Server Type] of the LDAP server is [Active Directory] or [Active
Directory Global Catalog]
User Name Format
SAM Account Name
Does not contain @
User Principal Name
Contains @
HINT
When specifying a SAM account name with a domain name, describe
"domain_name\SAM_account_name".
4.6 Configuring the Login-Related Settings
Authentication Process
Authenticate the user login name
(sAMAccountName).
Example: user
Authenticate the user login name
(userPrincipalName).
Example: user@example.com
92