Fujitsu N7100 Operator's Manual page 262

10. Set properties in either of the following ways.
 Enter properties directly in the input fields that correspond to the properties to
be edited.
 Press
Properties] window.
11. Press the [Scan] button.
When [Scan Viewer] is [Off], this will be a [Scan & Save] button.
 Scanning starts.
When [Scan Viewer] is [Off], the scan settings and scanning status (preview) can
be switched and shown during a scan.
When [Scan Viewer] is [On], the [Scan Viewer] window appears.
The maximum number of pages that can be scanned is 999.
When the blank page skip function is enabled, the number of scanned pages
excluding skipped blank pages is shown.
Additional pages can be scanned in place of skipped blank pages, until the
maximum number of scanned pages is reached.
 When the scanning has completed, the [Scan Viewer] window appears.
HINT
If the [Scan & Save] button is pressed when [Scan Viewer] is [Off], the scanned data is
saved immediately after the scanning is complete, and the touch panel screen returns to
the [Main Menu]. For details, refer to
305).
5.8 Saving the Scanned Data to a SharePoint Folder
for a property to be edited, and set the property in the [Edit
"5.10 Enabling/Disabling the Scan Viewer" (page
262