Fujitsu N7100 Operator's Manual page 246

3. Select a target printer and press the [OK] button.
HINT
Only printers which were added in the list by the administrator can be selected. To
change the printers in the list, contact the administrator.
For more details about adding printers, refer to
145).
 This returns you to the [Print] window.
HINT
 If the [Print Server Authentication] window appears, enter authentication information
needed to access the network printer and press the [OK] button.
 On the scanner, printing rights for the printer server are checked before printing can be
performed. When printing rights are being checked, data may be spooled temporarily.
4. Enter a number in [No. of Copies] field.
5. Make any required print setting changes.
The scaling, positioning, and print mode settings can be changed.
For details, refer to the following.
"5.6.1 Scaling" (page 248)
"5.6.2 Positioning" (page 252)
"5.6.3 Print Side" (page 254)
To return the print settings to the factory settings, press the [Default] button.
5.6 Printing the Scanned Data
"4.14 Setting the Network Printers" (page
246