Changing The Display Size Of Scanned Data; Resetting A Processed Image; Undoing And Redoing A Process; Rotating Scanned Data - Fujitsu N7100 Operator's Manual

■ Changing the Display Size of Scanned Data

The scanned data shown for [Original] and [Current] on the [Assisted Scan] window can
be zoomed in and out or can be fitted in the preview window.
1. Press

■ Resetting a Processed Image

The processed image shown on the [Assisted Scan] window can be re-set to the original
image.
1. Press to reset the processed image to the original image.

■ Undoing and Redoing a Process

An adjustment made to the scanned data shown on the [Assisted Scan] window can be
undone or redone.
1. Press
process.

■ Rotating Scanned Data

The scanned data shown on the [Assisted Scan] window can be rotated by 90 degrees.
1. Press

■ Changing the Image Mode of Scanned Data

When the image mode is [Automatic], the image mode of the scanned data shown on the
[Assisted Scan] window can be changed.
If this process is performed, the image returns to the original scanned data.
1. Press
5.11 Editing the Scanned Data in the Scan Viewer
to change the display size.
to change the scanned data to the previous state or redo a
to rotate the scanned data.
to change the image mode.
313