Energy Saver - Ricoh PE-P1 Service Manual

Anti-Humidity Mode
To reduce paper curl in high temperature and humidity environments, the fusing unit does idle rotation
before a job, if the customer enables this function in the user mode.
• Mode 1: No fusing idling, transfer roller voltage is increased
• Mode 2: Fusing unit rotates for 30 seconds before a job, transfer roller voltage is increased.
• Mode 3: Fusing unit rotates for 60 seconds before a job, transfer roller voltage is increased.

Energy Saver

There are two modes for energy saving.
• Low power mode (Energy Saver Mode 1):
This keeps the fusing temperature at 155°C for a specified time (adjustable with "Power Saver" in the
user mode) while the machine waits for the next print job.
• Sleep mode (Energy Saver Mode 2):
This turns off power to the engine unit after the time specified with "Power Saver" has passed.
Fusing and Exit
6
199