Ricoh PE-P1 Service Manual page 143

5. Service Tables
Fuser SC Detect
Color Registration
Reset Transfer Unit
Life Counter
Fuser SC Reset
5
Toner Limit
P P Name
N
Destination
2nd Transfer Fuser
Temp.
142
If On, the engine detects SC559. If Off, the engine does
On/Off*
not detect "Fusing SC Reset".
The engine will do color registration and density tuning automatically.
The printer will warm up automatically after this setting is changed.
Resets the transfer unit life counter.
This button is for resetting an SC related with the fusing errors.
Determines the maximum amount of ink/toner you can use
in any area of your text. This is where you are controlling
exactly how much ink will be used during printing.
Text
[200 to 400 / 250 (Default)/ 10/step]
Setting 0: Off
Determines the maximum amount of ink/toner you can use
in any area of your graphic. This is where you are
controlling exactly how much ink will be used during
Graphic
printing.
[200 to 400 / 250 (Default)/ 10/step]
Setting 0: Off
Determines the maximum amount of ink/toner you can use
in any area of your image. This is where you are controlling
exactly how much ink will be used during printing.
Image
[200 to 400 / 250 (Default)/ 10/step]
Setting 0: Off
NA Model: RICOH/ 'nul'
EU Model: RICOH/ NRG/ LANIER
ASIA Model: RICOH/ LANIER
China Model: RICOH
Sets the destination and updates the engine setting.
JPN/ NA (Default)/ EU/ ASIA/ China
Adjusts the transfer roller current, based on the default
value.
2nd Transfer Front
[-15 to 15 / 0 (Default) / 1 μA/step]