Table of Contents
Advertisement
Maintenance
Group (Tab)
Print Test Sheet
button
Registration
Adjustment
Tray 2
Horizontal
Adjustment
Vertical
Print Test Sheet
button
Registration
Bypass
Adjustment
Vertical
Color
Adjust button
Registration
Item
Selections
(-15 to +15)
step
(-15 to +15)
step
(-15 to +15)
step
Smart Organizing Monitor (Printer Model)
Remarks
Sends a PCL or GDI command to the printer to
print a test sheet.
It is disabled when tray 2 is not installed.
0.34 mm per step. Range is -5 mm to +5 mm.
If the machine settings are reset to the factory
defaults, this value does not change.
0.24 mm per step. Range is -3.6 mm to +3.6 mm
If the machine settings are reset to the factory
defaults, this value does not change.
Sends a PCL or GDI command to printer to print
a test sheet.
0.24 mm per step. Range is -3.6 mm to +3.6 mm
The engine will do color registration and density
tuning automatically.
The printer will warm up automatically after this
setting is changed.
5
119
Advertisement
Table of Contents
