Ricoh PE-P1 Service Manual page 126

Group (Tab) Item
USB I/O
Timeout
Network I/O
Timeout
TCP/IP
Netware
Interface
Apple Talk
Ethernet
speed
USB Setting
"*" indicates the factory default value.
Selections
If this setting is changed, the printer power must
be turned off/on for the new setting to take
effect.
15
60 *
300
15
60 *
300
If this setting is changed, the printer power must
Active*
be turned off/on for the new setting to take
Not Active
effect.
PCL only
Active*
If this setting is changed, the printer power must
Not Active be turned off/on for the new setting to take
effect.
PCL only
Active*
If this setting is changed, the printer power must
Not Active be turned off/on for the new setting to take
effect.
Auto*
10M half
10M full
100M half
100M full
If this setting is changed, the printer power must
Full Speed
be turned off/on for the new setting to take
Auto *
effect.
Smart Organizing Monitor (Printer Model)
Remarks
5
125