Table of Contents
Advertisement
5. Service Tables
Item
Fuser Temperature
Model
5
Brand ID
Mainte. ID
Registration
Tray1
Tray2
136
Selections
(-30 to 0)
Display string only
1: PE-P1a
2: PE-P1b
3: PE-P1c
00* – 7F
00* – 7F
Horizontal
Vertical
Horizontal (-15 to +15) step
Remarks
This adjusts the temperature of the fusing
unit, based on the default value. The range
of adjustment is from -30 [°C] to 0[°C], the
unit is 2.
The printer will warm up automatically after
this setting is changed. *2
Displays the current model in a dropdown
list.
Do not change this setting (Designed for
Factory Use).
Displays the current brand ID number.
Do not change this setting (Designed for
Factory Use).
Displays the current maintenance ID
number.
Do not change this setting (Designed for
Factory Use).
1.32mm per step. Range is -15mm to
+15mm.
If the machine settings are reset to the factory
defaults, this value does not change.
The printer will exit the energy saver state
after this setting is changed.
0.24mm per step. Range is -3.6mm to
+3.6mm
If the machine settings are reset to the factory
defaults, this value does not change.
The printer will exit the energy saver state
after this setting is changed.
1.32mm per step. Range is -5mm to +5mm.
If the machine settings are reset to the factory
defaults, this value does not change.
Advertisement
Table of Contents
