Table of Contents
Advertisement
Item
LSU Adjustment
Color Registration
button
2nd Transfer Front / Back
Media type
Front
Back
Selections
Input 160 bytes setting.
Display string only
0: Plain paper 1 mode
1: Plain paper 2 mode
2: Plain paper 3 mode
3: Reserved (not display)
4: Thick stock 1 mode
5: Thick stock 2 mode
6: Thick stock 3 mode (Not
used)
7: Thick stock 4 mode
8: Envelope 1 mode
(-15 to +15)
(-15 to +15)
Smart Organizing Monitor (Printer Model)
Remarks
Character: alphanumeric "0-9", "a-f", "A-
F", only valid data can be input.
Input length: 160 bytes
The engine will do color registration and
density tuning automatically.
The printer will warm up automatically after
this setting is changed.
Please select the media type.
This adjusts the transfer roller current, based
on the default value.
The range of adjustment is from -15 [μA] to
+15 [μA], in units of 1.
The printer will warm up automatically after
this setting is changed.
This adjusts the transfer roller current, based
on the default value.
The range of adjustment is from -15 [μA] to
+15 [μA], in units of 1.
Printer will warm up automatically after this
setting is changed.
5
135
Advertisement
Table of Contents
