Tm (Toner Mark) Sensor Base - Ricoh PE-P1 Service Manual

Image Transfer
3
3. ITB contact sensor assembly [A] ( x 1,  x 1)
4. ITB contact sensor [B] (hooks)

TM (Toner Mark) Sensor Base

1. Open the top cover.
2. Remove all AIO cartridges (* AIO Cartridge).
3. Slide the ITB unit to the front side or remove it.
4. Rear cover (* Right Cover)
5. Controller box cover (* Controller Board)
6. MF models only: Controller bracket (* EGB)
39