Table of Contents
Advertisement
5. Service Tables
Group (Tab)
FW Update
button
"*" indicates the factory default value.
System
5
Item
Auto Continue
Copies
Sub Paper Size
2 Sided Print
Blank Page Print
Low Power Standby
120
Item
Selections
FW update
button
Selections
On/Off *
1*-999
Off */ Auto
Off */ Short Edge Bind/ Long
Edge Bind
Print */ Not Print
On
Remarks
This button is for updating the controller firmware.
The button for updating the engine firmware is
located in the "SP Mode 1" tab.
Remarks
PCL only. Default is 1. Always disabled in the
GDI model.
PCL. A4 Letter override
PCL only
"Manual Duplex/Cover" has higher priority
than the "Blank Pages" setting.
Advertisement
Table of Contents
