Table of Contents
Advertisement
Item
Bypass Tray
Duplex Tray
Fuser SC Reset
Selections
Vertical (-15 to +15) step
Horizontal
Vertical
Horizontal (-15 to +15) step
Vertical (-15 to +15) step
Smart Organizing Monitor (Printer Model)
Remarks
The printer will exit the energy saver state
after this setting is changed.
0.24mm per step. Range is -3.6mm to
+3.6mm
If the machine settings are reset to the factory
defaults, this value does not change.
The printer will exit the energy saver state
after this setting is changed.
1.32mm per step. Range is -5mm to +5mm.
If the machine settings are reset to the factory
defaults, this value does not change.
The printer will exit the energy saver state
after this setting is changed.
0.24mm per step. Range is -3.6mm to
+3.6mm
If the machine settings are reset to the factory
defaults, this value does not change.
The printer will exit the energy saver state
after this setting is changed.
1.32mm per step. Range is -5mm to +5mm.
If the machine settings are reset to the factory
defaults, this value does not change.
The printer will exit the energy saver state
after this setting is changed.
0.24mm per step. Range is -3.6mm to
+3.6mm
If the machine settings are reset to the factory
defaults, this value does not change.
The printer will exit the energy saver state
after this setting is changed.
This button is for resetting an SC related with
the fusing errors.
5
137
Advertisement
Table of Contents
