Ricoh PE-P1 Service Manual page 119

5. Service Tables
Item
Custom Size
unit
Custom
Horizontal
5
Custom
Vertical
Priority Tray
"*" indicates the factory default value.
118
Selections
Mm */ Inch *
90*-216mm
148*-356mm
MPT
Tray1 *
Tray2
Remarks
If the paper size factory default is A4,
then the custom size factory default unit
is mm.
If the paper size factory default is Letter,
then the custom size factory default unit
is inch.
3.54 – 8.50 inch. Precision is two digits
after the decimal point in inch or one digit
after the decimal point in mm.
If an input value is more than the
maximum value, then it will be treated as
the maximum value.
If an input value is less than the minimum
value, then it will be treated as the
minimum value.
5.83 – 14.02 inch. Precision is two digits
after the decimal point in inch or one digit
after the decimal point in mm.
If an input value is more than the
maximum value, then it will be treated as
the maximum value.
If an input value is less than the minimum
value, then it will be treated as the
minimum value.
Not used
-