Table of Contents
Advertisement
6. The image above is displayed on the PC and "Firmware update" and "Updating" are displayed on
the operation panel.
7. Then, you can close this window at your PC.
• Do not turn off the machine until "Done Please reboot" is displayed in the operation panel. Otherwise,
the controller board will be damaged.
• If "Done Please reboot" does not appear, the download failed. Try again. You can also switch from
an Ethernet connection to a USB connection and see if that works. If you still cannot download the
firmware, it may be necessary to change the EGB and/or the controller board.
• If power failed during the download, try again. If you still cannot download the firmware, it may be
necessary to change the EGB and/or the controller board.
Updating the Engine Firmware
1. Make a folder in your computer.
2. Save the files (".bin", ".fwu", ".ini" and ".exe") in the folder.
3. Click the exe file to execute the updating program.
4. Click "Eng. F/W Update (USB or NET)" to send the engine firmware from PC to MF printer.
Firmware Updating
5
157
Advertisement
Table of Contents
