Ricoh PE-P1 Service Manual page 125

5. Service Tables
Group (Tab)
5
124
Item Selections
Gateway
xxx.xxx.xxx.xxx
address
DHCP On */ Off
DNS Server IP
xxx.xxx.xxx.xxx
Address
DNS Domain
Name
Remarks
If this setting is changed, the printer power must
be turned off/on for the new setting to take
effect.
Will show all zero if network initialization is not
finished. Any change will be ignored before the
end of network initialization.
The default setting is "255.255.255.0" when
DHCP is off.
This setting is not available if DHCP is enabled.
If this setting is changed, the printer power must
be turned off/on for the new setting to take
effect.
Will show all zero if network initialization is not
finished. Any change will be ignored before the
end of network initialization.
The default setting is "192.0.0.192" when
DHCP is off.
If this setting is changed, the printer power must
be turned off/on for the new setting to take
effect.
Up to 32 alphanumeric characters. This setting
is not available if DHCP is enabled.
The default setting is "0.0.0.0"when DHCP is off.
The setting when DHCP is changed from on to
off is the previous setting when DHCP was on.
If this setting is changed, the printer power must
be turned off/on for the new setting to take
effect.
Up to 32 alphanumeric characters. This setting
is not available if DHCP is enabled. The default
setting when DHCP is off is null string.
The setting when DHCP is changed from on to
off is the previous setting when DHCP was on.