Ricoh PE-P1 Service Manual page 129

5. Service Tables
Network 3
5
Group
(Tab)
Community
Name
Host IP Address
SNMP
Host IPX
Address
128
Item Selections
Null string *
0.0.0.0 *
"FFFFFFFFFFFFFFFFFFFF" *
Remarks
Up to 15 alphanumeric characters.
The factory default is 'null string'.
The factory default is 0.0.0.0
If this setting is changed, the printer power
must be turned off/on for the new setting to
take effect.
PCL only. String length is 20.
The factory default is 20 "F" characters.
Valid characters are:
"0123456789ABCDEFabcdef"; not case
sensitive when setting but the capital
character will change to lower case when
reading.
If this setting is changed, the printer power
must be turned off/on for the new setting to
take effect.
A valid string length is 0 or 20. String lengths
of 1 – 19 will cause the setting to be invalid.