Table of Contents
Advertisement
Coverage
Print Reports
G3 Protocol dump list
Engine Maintenance
This clears all counters except "Full Color" and "Black and White" in the total
counter.
Init Engine EEPROM
When you execute "Init Engine EEPROM", the engine EEPROM is initialized.
Turn the machine power off/on after you change this setting.
Displays only
1: PE-P1a
2: PE-P1b
Model
3: PE-P1c
Displays the current model in a dropdown list.
Do not change this setting (Designed for Factory Use).
00* – 7F
Brand ID
Displays the current brand ID number.
Do not change this setting (Designed for Factory Use).
00* – 7F
Maintenance ID
Displays the current maintenance ID number.
Do not change this setting (Designed for Factory Use).
Input 160 bytes
LSU Adjustment
setting.
When you execute "Trans. Belt Adjust", the transfer belt adjustment is done. This
Trans. Belt Adjust
calibrates the motor speed to match the length of the new transfer belt.
Displays the number of paper misfeeds with tray 1 or tray
2.
Coverage1 (Tray 1)/ Coverage2 (Tray2)
G3 protocol dump of the latest communication is printed.
(G181 doesn't support this)
Off (Default)/ Error/ On
Character: alphanumeric "0-9", "a-f", "A-F", only valid
data can be input.
Input length: 160 bytes
Service Menu (MF Model)
141
5
Advertisement
Table of Contents
