Permanent Hold - Honeywell TH8320R1003 Installation Manual

Overriding Schedules: Residential
Use
1. Touch
or to adjust the temperature (right side of
 
screen) and the Hold Until time (left side). The schedule
will resume when the Hold Until time expires.
Temporary Hold

Permanent Hold

2. Select Permanent Hold to keep the same temperature
until you change it or resume the program schedule.
Touch Cancel Hold at any time to resume the program
schedule.
Overriding Schedules: Commercial
Use
Touch or to adjust the temperature. It will be maintained

until the hold time you set.
• To change the hold time, touch the Hold Until arrow buttons.
This time can be adjusted up to the maximum time set by
the installer.
• Touch Override to use a pre-set occupied temperature if a
person uses the room during an unoccupied period. The
new temperature will be maintained for 1 hour and can be
adjusted up to the maximum time set by the installer.
MCR34103
Fig. 92.
MCR34169
Fig. 93.
The programmed schedule will resume when the override timer
expires. Touch Cancel Hold at any time to resume the program
schedule.
Viewing Equipment Status
1. Touch MENU.
2. Select Equipment Status.
Equipment Status
Date/Time
3. Touch or to view the status of all the equipment
 
your thermostat is controlling. Depending on how your
thermostat was installed, the Equipment Status screen
can report data about the following systems:
• Heating and cooling
• Fan
• Humidification
• Dehumidification
• Ventilation
• Maintenance reminders
• Thermostat information
Heat Stage 1: Off
Cool Stage 1: On
63
®
VISIONPRO 8000 WITH REDLINK™
MCR34106
Fig. 94.
MCR34100
Fig. 95.
MCR34108
Fig. 96.
MCR34109
Fig. 97.
68-0312—03