Honeywell TH8320R1003 Installation Manual page 20

®
VISIONPRO 8000 WITH REDLINK™
Table 1. Installer Options.
Menu Item
Installer Setup Select INSTALLER SETUP to set system
settings one by one.
Installer Test Select INSTALLER TEST to quickly
determine if the heat, cool, fan and
thermostat are operating properly. Minimum
off timers are ignored during the test.
Data Logs Select DATA LOGS to turn off/on the Alerts
Log or Interaction Log.
Wireless Select WIRELESS MANAGER to add,
Manager remove, rename or view the connected
wireless accessories.
Reset To Select RESET TO DEFAULTS to place all
Defaults thermostat settings back to the factory
settings.
Note: If the thermostat has been setup
WITHOUT an Equipment Interface Module
or the TrueZONE Wireless Adapter and you
would like to add one, you must reset the
thermostat back to factory defaults.
Device Info For Honeywell use only.
NOTE: You can use the thermostat microSD port to
download all Installer Setup settings, including
your company name and contact information. You
can upload this data to each thermostat you
install, to save time.
Make Changes to Installer Setup
NOTE: Use a microSD card to save set up time. See "To
Use the MicroSD Card in the Thermostat" on
page 101.
1. Touch Menu.
2. Select Installer Options.
ISU Installer Setup
Number Name
101 Application
Residential
Commercial
102 Zone Number
1-16
103 Thermostat Name [Select Thermostat Name]
104 Thermostat Type Non-Programmable
Programmable
105 Temperature Scale
Fahrenheit
Celsius
68-0312—03
Description
Table 2. Installer Setup (ISU) Table.
Settings Default
Residential
1
Thermostat
Programmable Both
Fahrenheit
Installer Options
3. Enter password (date code) and touch Done. See "Find-
ing Your Password (Date Code) to Access Installer
Options" beginning on page 19 for more information.
Enter password
4. Select Installer Setup.
Installer Setup
Installer Test
5. Follow prompts on the screen to select the desired setup
options. See Table 2 for Installer Setup options.
Residential,
Commercial Requires
or Both EIM
Both No
Both No
Both No
No
Both No
20
MCR33976
Fig. 61.
0 0 0 0
MCR33977
Fig. 62.
MCR34015
Fig. 63.
Notes
This ISU is only displayed on a thermostat
that is controlling a zone panel through the
THM4000 Wireless.
The Portable Comfort Control remote and
Web Interface displays the name of the
thermostat that you enter on this screen.