Battery Replacement - Honeywell TH8320R1003 Installation Manual

®
VISIONPRO 8000 WITH REDLINK™

Battery Replacement

Thermostat
Install fresh batteries when the REPLACE BATTERY warning
begins flashing. The warning flashes about 60 days before
batteries are depleted.
Replace Batteries
Press HERE for info
Even if the warning does not appear, it is recommended to
replace batteries once a year, or before leaving home for more
than a month.
Press the release button on top of the thermostat to remove it
from the wall plate. Install 4 fresh AA alkaline batteries.
Button Wallplate
Thermostat
68-0312—03
MCR34144
Fig. 298.
Thermostat
M34071
(back view)
Fig. 299.
Portable Comfort Control
78
REPLACE
BATTERY
Install fresh batteries when the REPLACE BATTERY warning
begins flashing. The warning flashes about 60 days before
batteries are depleted.
The Portable Comfort Control will restore communication with
the thermostat a few seconds after new batteries are installed.
Wireless Outdoor Sensor
Replace batteries in your outdoor sensor when a warning
appears on the thermostat screen, about 60 days before
batteries are depleted.
Outdoor Sensor
has low batteries
To replace the batteries:
1. Remove the sensor from the bracket.
2. Detach cover.
3. Install 2 fresh AA lithium batteries.
4. Replace cover and set sensor back into bracket.
The outdoor sensor will restore communication with the
thermostat a few seconds after new batteries are installed.
M32988
108
SET TO
78
M28896
MCR28475
MCR34145
Fig. 300.
MCR32937