Honeywell TH8320R1003 Installation Manual page 68

®
VISIONPRO 8000 WITH REDLINK™
Adjusting Dehumidification Settings:
Commercial Use
This feature can control a dehumidifier or use your air
conditioner to reduce humidity.
1. Touch MENU and select Dehumidification.
Dehumidification
Equipment Status
2. Select Auto.
Dehumidification
Off
3. Touch
or to select humidity level.
 
4. Touch Done to save your settings. Touch Cancel to
ignore changes.
If your air conditioner is used to control humidity, the
thermostat may use the following methods to maintain
humidity:
• Cool from 1° to 5° F lower than your temperature setting.
• Run cooling for the minimum "on" time to reduce humidity.
• Run cooling and heating at the same time to reduce
humidity without lowering the temperature.
68-0312—03
MCR34100
Fig. 123.
MCR34130
Fig. 124.
Auto
MCR34131
Fig. 125.
Adjusting Ventilation Settings
1. Touch MENU, and select Ventilation.
Ventilation
Equipment Status
2. Select Mode, Temporary Boost, or Lockout, then select
appropriate options.
Temporary Boost
3. Touch Done to save your settings. Touch Cancel to
ignore changes.
Ventilation Options
Mode:
Auto: Ventilation runs as programmed by the installer.
Off: Ventilation remains off unless turned on using the
timer.
On: Ventilation is always on.
Ventilation Mode
Off
68
MCR34100
Fig. 126.
MCR34132
Fig. 127.
Mode
MCR34133
Fig. 128.
MCR34134
Fig. 129.
Auto On
MCR34135
Fig. 130.