Table of Contents
Advertisement
INSTALLATION OPTIONS
The VisionPRO® 8000 with RedLINK™ system can be wired directly to the equipment, used with an Equipment Interface Module,
or with a TrueZONE wireless adapter.
If using the Equipment Interface Module, see "Installing Equipment Interface Module (if used)" on page 8.
If using a TrueZONE wireless adapter, follow the installation instructions that came with the TrueZONE panel, and go to "Selecting
Thermostat Location" beginning on page 11.
Wired Directly to Equipment
Dual Powered - C Wire or Battery
(C wire or Wire Saver required to use RedLINK accessories)
RedLINK to Equipment Interface Module
2 Wires for Power or
Battery Only (no wires)
RedLINK to TrueZONE Wireless Adapter
2 Wires for Power or
Battery Only (no wires)
Model Numbering
Stages
Residential or Commercial
Dual Powered - C Wire or Battery
Onboard Humidity Sensor
Number of Universal Relays
Number of Universal Sensor Inputs
Economizer / TOD Output
Works with Optional Equipment Interface Module*
Works with Optional TrueZONE Wireless Adapter*
* The relay outputs and inputs on the thermostat do not function when used with an Equipment Interface Module or the TrueZONE
Wireless Adapter.
* If the thermostat has been setup WITHOUT an Equipment Interface Module or the TrueZONE Wireless Adapter and you would
like to add one, you must reset the thermostat back to factory defaults. Press MENU > Installer Options > scroll down to select
Reset to Defaults.
OR
TM
OR
TM
Fig. 5. VisionPRO® 8000 with RedLINK™ installation options.
TH8321
3H/2C HP
3H/2C HP
2H/2C CONV
2H/2C CONV
1
1
7
®
VISIONPRO
8000 WITH REDLINK™
TH8320
TH8110
1H/1C HP
1H/1C CONV
0
1
0
1
68-0312—03
Hide quick links:
Advertisement
Table of Contents
