Honeywell TH8320R1003 Installation Manual page 35

ISU Installer Setup
Number Name
400 Scheduled
2 or 4 periods per day
Periods
401 Pre-Occupancy
Off
Purge
1 hour
2 hour
3 hour
402 Type of Override Standard
Initiate Occupancy
403 Override Duration No Limit
1 to 12 Hours
Table 2. Installer Setup (ISU) Table. (Continued)
Settings Default
4 periods per
day
Off
Standard
3 hours
35
VISIONPRO
Residential,
Commercial Requires
or Both EIM
Both No Residential:
4 Periods = Wake, Leave, Return, Sleep
2 Periods = Wake, Sleep
Commercial:
4 Periods = Occupied 1, Unoccupied 1,
Occupied 2, Unoccupied 2
2 Periods = Occupied 1, Unoccupied 1
Commercial No Runs the fan 1 to 3 hours before each
occupied period to provide a comfortable
workplace upon arrival.
Commercial No Standard:
The system maintains temperatures
programmed for the occupied and unoccupied
time periods. Pressing OVERRIDE will allow
the user to make a temporary schedule
change.
Initiate Occupancy:
The system maintains temperature at an
energy saving level until the user touches the
message center area on the thermostat. Note:
The message center displays Press HERE to
Start Occupancy. The system will then
maintain a comfortable temperature until the
occupied period ends. This option is
recommended for cost savings when the
workplace is used infrequently or arrival times
change from day to day (example - schools).
After the user touches Press HERE to Start
Occupancy, the user will still be able to
perform a standard OVERRIDE of the
schedule.
Commercial No When the user presses the OVERRIDE button,
the thermostat will maintain the new
temperature for at least 1 hour. The user can
adjust the Hold Until time from 1 hour to the
amount set for the Override Duration (1-12
hours). Default setting is 3 hours. If set to No
Limit, the user can adjust the Hold Until time
up to 24 hours.
®
8000 WITH REDLINK™
Notes
68-0312—03