Temperature Display - Honeywell TH8320R1003 Installation Manual

Wireless Indoor Sensor
The wireless indoor sensor senses temperature and humidity
in remote locations and communicates that information
wirelessly to the thermostat.
The indoor sensor can be used to do the following:
• Maintain a more consistent temperature throughout the
building by averaging temperatures. Temperatures from all
sensors, including the thermostat, are weighted equally.
• Relocate sensing location (thermostat is in a poor location).
• Relocate the thermostat (if you want to hide the thermostat).
• Humidify and dehumidify in separate spaces (for instance,
humidify on the main level, and dehumidify in the crawl
space).
You can connect up to 6 Wireless Indoor Sensors to the
thermostat. If you connect a Wired Indoor Sensor network to
the S1, S2, S3 or S4 terminals, you can connect up to 5
Wireless Indoor Sensors to the thermostat.
The indoor air sensor has a 1 year battery life.
Battery level indicators (when batteries are inserted)
• Good: Status light flashes green for 5 seconds.
• Low: Status light flashes red for 5 seconds. Use fresh
batteries.
Battery level indicators (during use)
• Good: Status light remains off.
• Low: Battery power will be depleted in about 2 months.
Thermostat displays Low Battery warning. Status light
remains off.
• Critical: Battery power will be depleted in about 2–3 weeks.
Status light flashes red.

Temperature Display

The temperature reading displayed on the home screen is from
the sensor or sensors that are being used for temperature
control.
In Fig. 308, the temperature reading is the average of the
thermostat internal sensor and the remote indoor sensor.
113
®
VISIONPRO 8000 WITH REDLINK™
Fig. 308.
68-0312—03