Honeywell TH8320R1003 Installation Manual page 60

®
VISIONPRO 8000 WITH REDLINK™
OPERATION
NOTE: The screen lights when you press any button. After you complete your changes, the screen stays lit for 16 sec-
onds if the thermostat is battery powered only or it stays lit for 45 seconds if the thermostat is system powered
(C wire). Depending on how your thermostat was installed, the screen light may always be on.
NOTE: The screen lights when you press any button. After you complete your changes, the screen stays lit for 16 sec-
onds if the thermostat is battery powered only or it stays lit for 45 seconds if the thermostat is system powered
(C wire). Depending on how your thermostat was installed, the screen light may always be on.
68-0312—03
Fig. 78. Quick reference to residential display.
HOME. Touch to display Home screen.
FAN. Select fan mode.
SYSTEM. Select system mode (Heat/Cool).
MENU. Touch to display options. Start here to set a program
schedule.
Current status. Shows system mode (heat/cool), outdoor
temperature and humidity (with optional outdoor sensor).
Override. Touch to override program schedule.
Current schedule. Touch an arrow to change temperature setting
and set a Temporary Hold.
Current program status.
Indoor conditions. Shows indoor temperature and humidity.
Current time. Touch to set the current time/date.
Alert Light. On when alert message is active or system is set to
EmHeat. Flashes for battery-only power; on continuous if system
powered.
Micro SD Card port. Use card to load holiday schedules and
custom events.
Fig. 79. Quick reference to commercial display.
60
HOME. Touch to display Home screen.
FAN. Select fan mode.
SYSTEM. Select system mode (Heat/Cool).
MENU. Touch to display options. Start here to set a
program schedule.
Current status. Shows system mode (heat/cool),
outdoor temperature and humidity (with optional
outdoor sensor).
Current schedule. Touch an arrow to change
temperature setting and select a Temporary or
Permanent Hold.
Indoor conditions. Shows indoor temperature and
humidity.
Current time. Touch to set the current time/date.
Alert Light. On when alert message is active or
system is set to EmHeat. Flashes for battery-only
power; on continuous if system powered.