Honeywell TH8320R1003 Installation Manual page 49

ISU Installer Setup
Number Name
805 Window
Off
Protection
On
806 User Humidifier in
User Humidifier in Heat Mode - No
or Yes
Heat Mode
Use Humidifier in Cool Mode - No
Use Humidifier in
or Yes
Cool Mode
Use Humidifier in Off Mode - No
Use Humidifier in or Yes
Off Mode
807 Humidifier Control
Hum when Heat is On
Hum when Fan is On
Tstat Controls Fan
Hum Controls Fan
808 Run Humidifier
Yes
when Cool is On
No
810 Hum Tank / Filter Off
Reminder
60 Run Time Days
90 Run Time Days
6 Calendar Months
12 Calendar Months
810 Humidifier Pad
Off
Reminder
60 Run Time Days
90 Run Time Days
6 Calendar Months
12 Calendar Months
Table 2. Installer Setup (ISU) Table. (Continued)
Settings Default
Off
User
Humidifier in
Heat Mode -
Yes
Default varies
based on
heating/cooling
equipment
selected
Defaults to
Hum when
Heat is On
when ISU 800
Humidifier
Type is Bypass
or Fan Pwrd
Defaults to
Tstat Controls
Fan when ISU
800 Humidifier
Type is Steam
Yes
Off
Off
49
VISIONPRO
Residential,
Commercial Requires
or Both EIM
Both No Requires an optional outdoor sensor.
Off: The thermostat controls the humidity level
to the user's desired humidity setting. Frost or
condensation may appear on windows.
On: The thermostat prevents frost or
condensation on windows by not allowing the
humidifier to run above a certain level. To
prevent frost or condensation, the thermostat
may turn off the humidifier before the
humidity setting is reached. See "Window
Protection" beginning on page 80.
Both No Heat: Includes Heat, Emergency Heat and
Auto. If the system is in Auto mode, the
thermostat will allow humidification if the last
call was for heat.
Cool: Includes Cool and Auto. If the system is
in Auto mode, the thermostat will allow
humidification if the last call was for cool. A
discharge air temperature sensor is required
to humidify in the Cool mode.
Off: The thermostat will allow humidification
when the system setting is Off.
See "Set up Humidification" beginning on
page 80.
Both No Hum when Heat is On: The thermostat turns
on the humidifier only if the heat is currently
running and humidification is needed.
Hum when Fan is On: The thermostat turns
on the humidifier only if the fan is currently
running and humidification is needed.
Tstat Controls Fan: The thermostat turns on
the humidifier and the fan when
humidification is needed.
Hum Controls Fan: The thermostat turns on
the humidifier when humidification is needed
and the humidifier controls the fan.
Both No Yes: Humidifier can run when the cooling
system is on.
No: Humidifier can NOT run when the cooling
system is on.
Both No This ISU is only displayed if ISU 800
Humidifier Type is Steam.
Run Time Days are not shown if ISU 800
Humidifier Type is set to None.
Both No This ISU is only displayed if ISU 800
Humidifier Type is Bypass or Fan Pwrd.
Run Time Days are not shown if ISU 800
Humidifier Type is set to None.
®
8000 WITH REDLINK™
Notes
68-0312—03