Honeywell TH8320R1003 Installation Manual page 101

6. When the Save As box opens, navigate to the directory
of your USB device and save the file. For example, if your
USB drive is letter "F," navigate to "My Computer" and
then drive "F."
7. After the file is saved, remove the microSD card from the
adapter and connect it to the thermostat. See Fig. 269.
Then select the "Dealer Information" option on the ther-
mostat.
8. See "To Use the MicroSD Card in the Thermostat" on
page 101.
To Use the MicroSD Card in the
Thermostat
1. Slide card into the bottom of thermostat. See Fig. 269.
2. Select the item to load or save.
Fig. 270.
Scroll to see:
Installer Setup
Dealer Information
Holiday Schedule
Custom Reminders
Data Logs
Software Update
3. Follow the prompts on the screen.
• To add information from the card to the thermostat,
select Load from SD Card.
• To put thermostat information on the card, select Save
to SD Card.
4. When you are finished, touch Done, then Home, and
remove the microSD card.
101
®
VISIONPRO 8000 WITH REDLINK™
Fig. 271.
68-0312—03