Honeywell TH8320R1003 Installation Manual page 37

ISU Installer Setup
Number Name
406 Max. Heat
Off
Recovery Ramp
1° F/hr to 20° F/hr
Rate
406 Max. Heat
Off
Recovery Outdoor
-20° F to 100° F
Temp
Table 2. Installer Setup (ISU) Table. (Continued)
Settings Default
8° F/hr
40° F
37
VISIONPRO
Residential,
Commercial Requires
or Both EIM
Commercial No Off: The heating system will begin recovery at
the time that is scheduled.
When a Maximum Recovery Ramp Rate is
set, the thermostat will begin recovery early to
ensure the temperature is reached at the
scheduled time.
Set a Maximum Recovery Ramp Rate based
on the rate that the heating system can
recover at for a mild day in your region.
Default setting is 8° F / hour.
Set an Outdoor Temperature that is
representative of a mild day in your region to
be associated with the Maximum Recovery
Ramp Rate. The thermostat will begin
recovery at the optimal time based on a
calculated ramp rate, allowing the system to
recover on time and save energy during
changing outdoor conditions.
During recovery, the setpoint changes at a
rate in degrees per hour depending on the
outdoor temperature.
Commercial No Off: The heating system will begin recovery at
the time that is scheduled.
When a Maximum Recovery Ramp Rate is
set, the thermostat will begin recovery early to
ensure the temperature is reached at the
scheduled time.
Set a Maximum Recovery Ramp Rate based
on the rate that the heating system can
recover at for a mild day in your region.
Default setting is 8° F / hour.
Set an Outdoor Temperature that is
representative of a mild day in your region to
be associated with the Maximum Recovery
Ramp Rate. The thermostat will begin
recovery at the optimal time based on a
calculated ramp rate, allowing the system to
recover on time and save energy during
changing outdoor conditions.
During recovery, the setpoint changes at a
rate in degrees per hour depending on the
outdoor temperature.
®
8000 WITH REDLINK™
Notes
68-0312—03