Honeywell TH8320R1003 Installation Manual page 95

or dehumidification. The thermostat will indicate whether
this meets or may not meet the ASHRAE 62.2 Standard
or the Percent On Time setting. See Fig. 237.
NOTE: ISU 1014 Lockout Ventilation on Humidification
or Dehumidification Calls is not an option when
you select ASHRAE is Priority at ISU 1012.
Fig. 237.
11. Select whether to Ventilate on High Indoor Humidity. See
"Ventilate on High Indoor Humidity (ISU 1016)" on
page 92 for more information. See Fig. 238.
Fig. 238.
Control Ventilation Level
1. Touch MENU, and select Ventilation.
Fig. 239.
Ventilation
Equipment Status
Fig. 240.
2. Select Mode, Temporary Boost, or Lockout, then select
3. Touch Done to save your settings. Touch Cancel to
Ventilation Options
Mode:
Auto: Ventilation runs as programmed by the installer.
Off: Ventilation remains off unless turned on using the
timer.
On: Ventilation is always on.
Temporary Boost: Touch
ventilation temporarily. To turn it off, set it to zero.
MCR34100
Lockout: Touch
MCR34132
Select Yes to prevent ventilation from running during the Sleep
or Unoccupied (commercial) program periods or when outdoor
conditions exceed values set by the installer.
95
VISIONPRO
appropriate options.
Mode
Temporary Boost
Fig. 241.
ignore changes.
Fig. 242.
Ventilation Mode
Off Auto
Fig. 243.
or
 
Run Ventilation For
60 minutes
Fig. 244.
or to select Yes or No, then touch Next.
 
®
8000 WITH REDLINK™
MCR34133
MCR34134
On
MCR34135
to select how long to run
MCR34136
68-0312—03